|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
APT80M60J 600V, 80A, 0.060 Max N-Channel MOSFET Power MOS 8TM is a high speed, high voltage N-channel switch-mode power MOSFET. A proprietary planar stripe design yields excellent reliability and manufacturability. Low switching loss is achieved with low input capacitance and ultra low Crss "Miller" capacitance. The intrinsic gate resistance and capacitance of the poly-silicon gate structure help control slew rates during switching, resulting in low EMI and reliable paralleling, even when switching at very high frequency. Reliability in flyback, boost, forward, and other circuits is enhanced by the high avalanche energy capability. S G D S SO 2 T- 27 ISOTOP (R) "UL Recognized" file # E145592 APT80M60J G D Single die MOSFET S FEATURES * Fast switching with low EMI/RFI * Low RDS(on) * Ultra low Crss for improved noise immunity * Low gate charge * Avalanche energy rated * RoHS compliant TYPICAL APPLICATIONS * PFC and other boost converter * Buck converter * Two switch forward (asymmetrical bridge) * Single switch forward * Flyback * Inverters Absolute Maximum Ratings Symbol ID IDM VGS EAS IAR Parameter Continuous Drain Current @ TC = 25C Continuous Drain Current @ TC = 100C Pulsed Drain Current Gate-Source Voltage Single Pulse Avalanche Energy 2 Avalanche Current, Repetitive or Non-Repetitive 1 Ratings 80 50 445 30 3350 60 Unit A V mJ A Thermal and Mechanical Characteristics Symbol PD RJC RCS TJ,TSTG VIsolation WT Characteristic Total Power Dissipation @ TC = 25C Junction to Case Thermal Resistance Case to Sink Thermal Resistance, Flat, Greased Surface Operating and Storage Junction Temperature Range RMS Voltage (50-60hHz Sinusoidal Waveform from Terminals to Mounting Base for 1 Min.) Package Weight -55 2500 1.03 29.2 10 1.1 0.15 150 C V oz g in*lbf N*m 12-2006 050-8101 Rev A Min Typ Max 960 0.13 Unit W C/W Torque Terminals and Mounting Screws. Microsemi Website - http://www.microsemi.com Static Characteristics Symbol VBR(DSS) VBR(DSS)/TJ RDS(on) VGS(th) VGS(th)/TJ IDSS IGSS TJ = 25C unless otherwise specified Test Conditions VGS = 0V, ID = 250A Reference to 25C, ID = 250A VGS = 10V, ID = 60A VGS = VDS, ID = 5mA VDS = 600V VGS = 0V TJ = 25C TJ = 125C APT80M60J Typ 0.57 0.047 4 -10 Max Unit V V/C V mV/C A nA Parameter Drain-Source Breakdown Voltage Breakdown Voltage Temperature Coefficient Drain-Source On Resistance 3 Min 600 Gate-Source Threshold Voltage Threshold Voltage Temperature Coefficient Zero Gate Voltage Drain Current Gate-Source Leakage Current 3 0.060 5 100 500 100 VGS = 30V Dynamic Characteristics Symbol gfs Ciss Crss Coss Co(cr) Co(er) Qg Qgs Qgd td(on) tr td(off) tf 4 TJ = 25C unless otherwise specified Test Conditions VDS = 50V, ID = 60A VGS = 0V, VDS = 25V f = 1MHz Parameter Forward Transconductance Input Capacitance Reverse Transfer Capacitance Output Capacitance Effective Output Capacitance, Charge Related Min Typ 115 24000 245 2200 1170 Max Unit S pF 5 VGS = 0V, VDS = 0V to 400V Effective Output Capacitance, Energy Related Total Gate Charge Gate-Source Charge Gate-Drain Charge Turn-On Delay Time Current Rise Time Turn-Off Delay Time Current Fall Time VGS = 0 to 10V, ID = 60A, VDS = 300V Resistive Switching VDD = 400V, ID = 60A RG = 2.2 6 , VGG = 15V 605 600 130 250 135 155 410 125 nC ns Source-Drain Diode Characteristics Symbol IS ISM VSD trr Qrr dv/dt Parameter Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) 1 Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Peak Recovery dv/dt Test Conditions MOSFET symbol showing the integral reverse p-n junction diode (body diode) Min D Typ Max 80 Unit A G S 445 1.0 900 37 8 V ns C V/ns ISD = 60A, TJ = 25C, VGS = 0V ISD = 60A 3 diSD/dt = 100A/s, TJ = 25C ISD 60A, di/dt 1000A/s, VDD = 100V, TJ = 125C 1 Repetitive Rating: Pulse width and case temperature limited by maximum junction temperature. 2 Starting at TJ = 25C, L = 1.86mH, RG = 2.2, IAS = 60A. 3 Pulse test: Pulse Width < 380s, duty cycle < 2%. 4 Co(cr) is defined as a fixed capacitance with the same stored charge as COSS with VDS = 67% of V(BR)DSS. 5 Co(er) is defined as a fixed capacitance with the same stored energy as COSS with VDS = 67% of V(BR)DSS. To calculate Co(er) for any value of VDS less than V(BR)DSS, use this equation: Co(er) = -2.32E-7/VDS^2 + 9.75E-8/VDS + 3.64E-10. 6 RG is external gate resistance, not including internal gate resistance or gate driver impedance. (MIC4452) Microsemi reserves the right to change, without notice, the specifications and information contained herein. 050-8101 Rev A 12-2006 500 V GS = 10V 200 180 160 TJ = -55C T = 125C J APT80M60J V GS 400 ID, DRAIN CURRENT (A) ID, DRIAN CURRENT (A) = 7&8V 140 120 100 80 60 40 20 0 0 5V 4.5V 5.5V 6V 300 TJ = 25C 200 100 TJ = 150C TJ = 125C 0 30 25 20 15 10 5 0 VDS(ON), DRAIN-TO-SOURCE VOLTAGE (V) Figure 1, Output Characteristics NORMALIZED TO VGS = 10V @ 60A 30 25 20 15 10 5 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 2, Output Characteristics RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE 3.0 2.5 2.0 1.5 1.0 0.5 450 400 ID, DRAIN CURRENT (A) 350 300 250 200 150 100 50 0 0 VDS> ID(ON) x RDS(ON) MAX. 250SEC. PULSE TEST @ <0.5 % DUTY CYCLE TJ = -55C TJ = 25C TJ = 125C 0 25 50 75 100 125 150 0 -55 -25 TJ, JUNCTION TEMPERATURE (C) Figure 3, RDS(ON) vs Junction Temperature 250 8 7 6 5 4 3 2 1 VGS, GATE-TO-SOURCE VOLTAGE (V) Figure 4, Transfer Characteristics Ciss 30,000 10,000 gfs, TRANSCONDUCTANCE 200 150 TJ = 25C TJ = 125C C, CAPACITANCE (pF) TJ = -55C 1000 Coss 100 100 Crss 50 0 0 20 40 60 80 100 120 140 160 ID, DRAIN CURRENT (A) Figure 5, Gain vs Drain Current 600 500 400 300 200 100 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 6, Capacitance vs Drain-to-Source Voltage 0 450 ISD, REVERSE DRAIN CURRENT (A) 400 350 300 250 200 150 100 50 0 0 TJ = 150C 10 16 VGS, GATE-TO-SOURCE VOLTAGE (V) 14 12 10 8 6 4 2 ID = 60A VDS = 120V VDS = 300V TJ = 25C VDS = 480V 050-8101 100 200 300 400 500 600 700 800 900 Qg, TOTAL GATE CHARGE (nC) Figure 7, Gate Charge vs Gate-to-Source Voltage 0 0 1.5 1.2 0.9 0.6 0.3 VSD, SOURCE-TO-DRAIN VOLTAGE (V) Figure 8, Reverse Drain Current vs Source-to-Drain Voltage Rev A 12-2006 600 I 600 I APT80M60J 100 ID, DRAIN CURRENT (A) DM 100 ID, DRAIN CURRENT (A) DM 10 Rds(on) 13s 100s 1ms 10 Rds(on) 13s 100s 1 TJ = 125C TC = 75C 10ms 100ms DC line 1 TJ = 150C TC = 25C 1ms 10ms 100ms DC line 0.1 1 800 100 10 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 9, Forward Safe Operating Area 0.1 Scaling for Different Case & Junction Temperatures: ID = ID(T = 25C)*(TJ - TC)/125 C 800 100 10 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 10, Maximum Forward Safe Operating Area 1 TJ (C) 0.0305 Dissipated Power (Watts) 0.0830 1.07 TC (C) 0.100 ZEXT are the external thermal impedances: Case to sink, sink to ambient, etc. Set to zero when modeling only the case to junction. Figure 11, Transient Thermal Impedance Model 0.14 ZJC, THERMAL IMPEDANCE (C/W) 0.12 0.10 0.08 0.5 0.06 0.04 0.02 0 10-5 0.3 Note: D = 0.9 0.7 ZEXT PDM t1 t2 0.1 0.05 10-4 SINGLE PULSE Duty Factor D = 1/t2 Peak TJ = PDM x ZJC + TC t1 = Pulse Duration t 10-1 10-2 10-3 RECTANGULAR PULSE DURATION (seconds) Figure 12. Maximum Effective Transient Thermal Impedance Junction-to-Case vs Pulse Duration 1.0 SOT-227 (ISOTOP(R)) Package Outline 31.5 (1.240) 31.7 (1.248) 7.8 (.307) 8.2 (.322) W=4.1 (.161) W=4.3 (.169) H=4.8 (.187) H=4.9 (.193) (4 places) 11.8 (.463) 12.2 (.480) 8.9 (.350) 9.6 (.378) Hex Nut M4 (4 places) r = 4.0 (.157) (2 places) 4.0 (.157) 4.2 (.165) (2 places) 25.2 (0.992) 0.75 (.030) 12.6 (.496) 25.4 (1.000) 0.85 (.033) 12.8 (.504) 12-2006 3.3 (.129) 3.6 (.143) 14.9 (.587) 15.1 (.594) 1.95 (.077) 2.14 (.084) * Source Drain * Emitter terminals are shorted internally. Current handling capability is equal for either Source terminal. 30.1 (1.185) 30.3 (1.193) 38.0 (1.496) 38.2 (1.504) Rev A * Source Dimensions in Millimeters and (Inches) Gate 050-8101 ISOTOP(R) is a registered trademark of ST Microelectronics NV. Microsemi's products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved. |
Price & Availability of APT80M60J |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |